• Новинка
HBS507 равно: ES-D508 старая модель HBS57 замкнутый контур шагового привода max 50 vdc Вход Напряжение и 8.0A ток Leadshine

HBS507 равно: ES-D508 старая модель HBS57 замкнутый контур шагового привода max 50 vdc Вход Напряжение и 8.0A ток Leadshine

₽ 5069.00
₽ 5695.86
Товаров
Доступен к заказу

Notice :            We only supply genuine Leadshine servo motor drive with reasonable price, if your budget is limit, please contact our service man online and he she will recommend you the low price other supplier.   HBS507 ( equal to : ES-D508 updated from HBS57) Closed-loop Stepper Drive     Same as brushless servo systems, a HBS57 servo drive can take encoder feedback from driven easy servo motors and close the position loop to eliminate possibility of lose of movement synchronization. Therefore, stall and loss of steps commonly seen in open-loop stepper systems will never occur in HBS57 driven easy servo systems. Compared with constant output current in open loop stepper drive, output current from a HBS57 servo drive to the driven motor is load based. When torque requirement is low, the output current is automatically lowered to "just enough". But when the torque requirement is high, HBS57 can boost the output current up to 8.0 A. This can significantly lower down motor heating by up to 50% over open-loop stepper systems. There is no torque reservation needed for an HBS57 driven easy servo system. You can always implement 100% of the driven stepper motor and thus improve system high speed performance by as much as 30% over open lop stepper systems. Smoothness, quietness (50% improvement), and acceleration (30% improvement) are also significantly improved in HBS57 easy servo systems.   Compared with traditional brushless servo systems, cost of HBS57 easy servo systems is much lower. They outperforms traditional brushless servo systems with the feature of much higher low-middle speed torque, high stiffness, quicker response time, no position hunting, no tuning / easy setup, no overshooting, and zero settling time. Features : 32-bit DSP based vector control algorithm to combine advantage of open-loop stepper brushless servo drives Step/Direction or CW/CCW command input Default maximum 200 K frequency; 500 K optional Input voltage : 20-50 VDC Load-based automatically adjusted output current of 0-8.

Больше информации

Тип двигателя:
Двигатель постоянного тока
Артикул:
HBS507
Питание:
DC

Товары в категории